When To Use This Document

Use this document when you need to reset the power system on a Jaco EVO Cart


  • Unplug cart from wall outlet before continuing

Process / Instructions

*NOTE* A Power system reset will make the cart lose calibration. This will result in the LED Battery indicator to be inaccurate. The calibration process will need to be performed to ensure the LED Battery indicator is accurate.

Please see the Calibration Document for this process.

  1. Open the right-side inverter door by loosening the thumb screw.
  2. Disconnect the long battery cable (plugged into the P1 port) by pressing on the Tab and pulling by the connector, not by the wires.
    1. Leave it Disconnected for 5 Minutes
    2. Plug the Connector back in
    3. Plug the Recharge Cord into Power Outlet

Results and Analysis

If a power system reset does not remedy the issue, please contact JACO support for further assistance.