When To Use This Document
Use this document when replacing Drawer Slides.
- Draw Removed from Cabinet.
- 5/64" Allen Key
Process / Instructions
- With the drawer removed from the cabinet, remove 2 button head screws from each inner slide and replace slide with supplied parts.
- From inside of cabinet, remove 2 socket head screws from each outer slide and replace with supplied new parts.
- Before inserting drawer into cabinet, be sure that ball bearing brackets are slid out to the outer end of each slide as shown. This will prevent damage to ball bearings.
Results and Analysis
If any issues are questions are had, please contact JACO Support for further assistance.